Headliner Replacement: Several Tips Which May Help You While Replacing Or Fixing Up The Headliner

Posted by on April 23, 2012 | No Comments

Sometime when you are considering a custom auto interiors project for your car, you might decide to change or fix up the headliner. The headliner is that part of fabric that is attached to a board on the inside roof. Moisture and heat can affect the foam binding the material and this can result in sagging or falling fabric. This is particularly common in cars that were manufactured in the 70′s but can happen to any auto.

It canexpense upwards of $200 to get the headliner replaced (probably less, if you do it as part of a larger custom auto interiors project) so it’s something you may wish to think doing yourself. it’s not difficult but can be tedious and may require 2 people. Don’t try to do it on a day when the weather conditions is against you. You want it to be warm but not excessively hot as that will make the glue very tacky.

Remove all the screws you can see i.e. those holding the lights and visors to the headliner. Keep these in a secure place as you’ll need them when you’re putting it back together. You then remove the headliner which as we’ve seen is just a board covered in fabric. You’ll need to remove the existing cover and scrape off as much of the old glue as possible. If you do not do these steps you will affect the uniformity of the new finish. While selecting your fabric, it would be a great idea to tell the fabric shop assistant what you want to use it for.

Some materials just are not suitable. You can alteration the color scheme but it would be sensible not to change the texture of the fabric too much. Don’t go from thin to very thick as this could make putting all the pieces back together that a lot more difficult! You also need to choose a covering that’s appropriate for use with glue adhesive.

Do not skimp on the fabric. it is always best to have too much rather than very little. Spray the board with glue adhesive and put the covering over it. Keep it tight to avoid any crinkles or gaps. You’ll need to pay attention to the corners and make them very neat. You then need to let it dry entirely before putting back into the car. If you would rather not chance doing it yourself and messing it up, however, any decent custom auto interiors expert who’s worth anything can do it fast and easily for you.

sunglasses online

Leave a Reply

You must be logged in to post a comment.

Tags

Popular Search Terms

Random Search Terms